Averna’s capabilities target the hardest part of an EMC campaign: keeping the equipment under test operational and observable while it faces aggressive disturbance.
Hardware-in-the-Loop Simulation
Hardware-in-the-loop testing lets a device under test run inside a chamber as if it were installed in the real world. U-TEST®, software-in-the-loop embeds mathematical models and digital twins of its surroundings, closing the loop in real time. Every accessible parameter is timestamped and recorded for analysis or replay, which lets engineers pin an anomaly during an immunity sweep to the exact frequency and moment it appeared.
Conducted and Radiated Emissions and Immunity Testing
Averna covers the core EMC test methods. Conducted emissions and conducted immunity testing address noise traveling along power and signal lines, while radiated emissions and radiated immunity testing address energy carried through the air. Transient and low-frequency phenomena such as ESD, surge, EFT/burst and magnetic field immunity complete the coverage.
Disturbance-Immune Stimulation and Measurement
Purpose-built hardware drives sensors and reads actuators without picking up the field applied to the device. The platform keeps its own emissions discreet and blocks disturbance propagation through cabling, protecting the validity of each result.
Multi-Purpose EMC Qualification Platforms
Each platform arrives ready to use, which cuts setup and teardown time at the lab. Once the campaign ends, the same hardware supports software and hardware integration testing, spreading its cost across the program.
EMI Measurement Chain and Test Automation
Averna integrates EMI test receivers, LISNs, BCI probes and RF power amplifiers with automation software that applies the appropriate test settings and procedures according to applicable EMC standards.
Near-Field Diagnostics and Mitigation Engineering
E-field and H-field probes paired with spectrum analysis localize emissions down to the offending component. Engineers then validate shielding, twisted-pair routing or ferrite fixes on the spot.
