URT-5000 Specifications
RF OUTPUT SPECIFICATIONS
|
Frequency |
|
|
Output Range |
140 kHz to 2.5 GHz |
|
Resolution |
0.1 Hz |
|
Phase Noise@ 1 GHz |
<-90 dBc/Hz, 1kHz Offset |
|
<-95 dBc/Hz, 10 kHz Offset |
|
|
<-110 dBc/Hz, 100 kHz Offset |
|
|
Noise Floor |
-140dBm/Hz @ 10MHz Offset |
|
Internal Reference |
+/- 0.2 ppm initial accuracy |
|
+/- 0.8 ppm/year aging |
|
|
+/- 1.0 ppm temperature stability |
|
|
Amplitude & Power |
|
|
Output Range |
-140 dBm to +10 dBm P.E.P. |
|
Resolution |
0.1 dB |
|
Accuracy |
+/-1.0 dB (>-110 dBm), +/-2.0 dB (≤ -110 dBm) |
|
Gain Resolution, RF Playback |
0.25dB |
|
Max. IMD level |
-60 dBm typ. (two -5 dBm tones) |
|
Harmonics NOTE : All specifications apply for √(12+Q2)=0.5FS |
-30dBc @ 0dBm
|
|
Baseband |
|
|
1 MHz to 20 MHz real-time BW |
|
|
Sample Rate |
25MS/s |
|
Dynamic Range |
80 dB SFDR |
|
Output Resolution |
16-bit |
CONNECTIVITY
|
RF Connectors |
|
|
RF Output (50Ω) |
1 x N Female |
|
+20 dBm, +/- 16V DC, AC Coupled |
|
|
LO |
|
|
LO Input |
1 x SMA Female |
|
Freq 150MHz/2.5GHz |
|
|
LO Output |
1 x SMA Female |
|
Freq 150MHz/2.5GHz |
|
|
10 MHz Reference |
|
|
10Mhz REF Input (50Ω) |
1 x SMA Female |
|
Freq 10MHz |
|
|
10Mhz REF Output (50Ω) |
1 x SMA Female |
|
Freq 10MHz |
|
|
100MHz Sample Clock |
|
|
Clock Input (50Ω) |
1 X SMA Female |
|
Freq 100MHz |
|
|
Clock Output (50Ω) |
1 X SMA Female |
|
Freq 100MHz |
|
|
Trigger/Sync Input(s) & Output(s) |
|
|
Input (50Ω) |
2 x SMA Female |
|
Freq: PULSE, |
|
|
Output (50Ω) |
1 x SMA Female |
|
Freq: PULSE, |
|
|
Ethernet |
|
|
1 x 10/100/1000 Mbps RJ-45 LAN Port |
|
|
Peripheral |
|
|
4 x USB 2.0/1.1 Type A Peripheral Ports (back) |
|
|
2 x USB 2.0/1.1 Type A Peripheral Ports (front) |
|
|
Display |
|
|
1 x DBHD-15F VGA port |
|
|
Compliance |
|
|
|
|
|
|
|
|
FCC 47 part 15 Class A |
|
|
European Directive 98/336/EEC Class A (Emissions) |
|
|
European Directive 2002/95/EC (WEEE) |
|
ENVIRONMENTAL
|
Warm Up Time |
|
|
60 min @ 20 OC (typ.) |
|
|
Weight |
|
|
15kg (33.06 lbs) |
|
|
Size (H x W x D) |
|
|
Unit |
2 U |
|
Rackmount |
19 in |
|
Deep |
16 in |
|
Removable rack ears and handles |
|
|
Temperature |
|
|
Operating |
+ 5 oC (41 oF) to 45 oC (113 oF)
|
|
Storage |
-20 oC (-4 oF) to 70 oC (158 oF)
|
|
Relative Humidity4 |
|
|
10% to 90% (non-condensing) |
|
|
Storage |
|
|
4 x 2.5” Hot-swappable Drive Bays |
|
|
Up to 4 x 2.5” 500 GB SATA 2.0Hard Disc Drives |
|
|
Calibration |
|
|
2 years |
|
|
Warranty |
|
|
24 months |
|
|
Power |
|
|
90-264 VAC |
|
|
50/60 Hz |
|
|
125 Watts (typ.) |
|
|
IEC 60320-C14 Power connector inlet |
|
|
IEC 60320-C13 to NEMA 5-15P, 3m (9.8 ft) North American Power cord included |
|
|
IEC 60320-C13 to CEE 7/7, 3m (9.8 ft) European Power cord included |
|
