RP-5100 Series Specifications
RF output specifications
|
Frequency |
||
|
Input Frequency |
250 kHz to 2.5 GHz |
|
|
Resolution |
0.1 Hz |
|
|
Phase Noise (1 GHz @ 10 kHz offset) |
<-90 dBc/Hz |
|
|
Internal Reference |
10 MHz |
|
|
+/- 50 ppb (max) initial accuracy |
||
|
+/- 100 ppb/year aging |
||
|
Temperature Stability |
20 ppb (max) |
|
|
Amplitude |
||
|
Noise floor |
-172 dBm/Hz (w/ LNA Pre-Amp) |
|
|
2 dB noise figure nominal |
||
|
Input Signal |
-140 dBm to +10dBm |
|
|
Adjustable Pre Amp gain range(with LNA) |
> 55 dB |
|
|
0.5 dB steps |
||
|
Level Accuracy |
+/- 1dB (typ) |
|
|
Baseband |
||
|
Real-time Bandwidth |
1 MHz to 20 MHz |
|
|
Sample Rate |
25MS/s |
|
|
Dynamic Range |
80 dB SFDR |
|
|
Output Resolution |
14-bit |
|
Connectivity
|
RF Connectors (50Ω) |
||
|
IN (Pre-Amp) |
1 x SMA Female per channel |
|
|
AC coupled |
||
|
DC+RF (Bias-T) |
1 x SMA Female per channel |
|
|
DC coupled, 2 – 10 V |
||
|
RF (Bias-T) |
1 x SMA Female per channel |
|
|
AC coupled |
||
|
GPS antenna |
1 x SMA Female |
|
|
DC coupled, antenna bias |
||
|
10 MHz Reference |
||
|
10 MHz REF Input (50Ω) |
1 x SMA Female |
|
|
Freq 10MHz |
||
|
10 MHz REF Output (50Ω) |
1 x SMA Female |
|
|
Freq 10MHz |
||
|
Trigger/Sync Input(s) & Output(s) |
||
|
Input (50Ω) |
1 x SMA Female |
|
|
Freq: PULSE, |
||
|
Output (50Ω) |
1 x SMA Female |
|
|
|
Freq: PULSE, |
|
|
Ethernet |
||
|
1 x 10/100/1000 Mbps RJ-45 LAN Port |
||
|
Keyboard, Mouse & Service Port |
||
|
2 x USB 2.0/1.1 Type A connector ports |
||
|
External Display |
||
|
1 x DBHD-15F VGA port |
||
Environmental
|
Warm Up Time |
|
|
30 min (typ.) |
|
|
Weight |
|
|
RP-5100/22.7 Kgs (50 lbs.), RP-5120 |
|
|
Size (H x W x D) |
|
|
273 mm (10.75 in) x 311 mm (12.25 in) x 533 mm (21 in) |
|
|
597 mm (23.5 in) x 419 mm (16.5 in) x 686 mm (27 in) |
|
|
w/lightweight reusable shipping container (13.5 lbs) |
|
|
Temperature |
|
|
Operating |
+ 0 oC (32 oF) to 45 oC (113 oF) |
|
Storage |
-20 oC (-4 oF) to 70 oC (158 oF) |
|
Relative Humidity |
|
|
10% to 90% (non-condensing) |
|
|
Power |
|
|
DC Input |
11-15 Volts |
|
165 Watts (typ) - RP-5110 190 Watts (typ) - RP-5120 |
|
|
DB 7W2 Terminal Connector |
|
|
SAE j563 12-Volt Size A to DB 7W2, 5.5 m (18 ft) North American power cord included |
|
|
SAE j563 12-Volt Size B to DB 7W2, 5.5 m (18 ft) European power cord included |
|
|
Battery clips to DB 7W2, 5.5 m (18 ft) power cord included |
|
|
AC Supply |
90-264 Volts |
|
50/60 Hz |
|
|
200 Watts (typ) – RP-5110 |
|
|
230 Watts (typ) – RP-5120 |
|
|
IEC 60320-C14 power connector inlet |
|
|
IEC 60320-C13 to NEMA 5-15P, 3m (9.8 ft) North American power cord |
|
|
IEC 60320-C13 to CEE 7/7, 3m (9.8 ft) European power cord included |
|
|
Compliance |
|
|
|
|
|
|
|
|
FCC 47 part 15 Class A |
|
|
European Directive 98/336/EEC Class A (Emissions) |
|
|
European Directive 2002/95/EC (WEEE) |
|
|
Integrated Display |
|
|
1024 x 768 pixel, 10.5 in integrated touch-ready display |
|
|
Calibration |
|
|
1 year |
|
|
Storage |
|
|
4 x 2.5 in hot-swappable drive bays |
|
|
Up to 4 x 2.5 in 500 GB (2 TB total) |
|
|
SATA 2.0 hard drives |
|
