RP-3200 Specifications

OutputRange

85 MHz to 2.7 GHz^1,2

85 MHz to 2.7 GHz^1,2

Resolution

0.1 Hz

0.1 Hz

Phase Noise@ 1 GHz

<-100 dBc/Hz @ 1 kHz offset

<-105 dBc/Hz @ 10 kHz offset

<-120 dBc/Hz @ 100 kHz offset

<-100 dBc/Hz @ 1 kHz offset

<-110 dBc/Hz @ 10 kHz offset

<-120 dBc/Hz @ 100 kHz offset

Noise Floor

-140 dBm/Hz

-155 dBm/Hz (-172 dBm/Hz)³

Internal Reference

±0.1 × 10^–6, initial accuracy

±0.5 × 10^–9, ageing per day

±0.5 × 10^–9, over temperature range

OutputRange

-140 dBm to +10 dBm P.E.P.⁴

Resolution

0.1 dB

Accuracy

+/- 1.0 dB (>-100 dBm) typical

+/- 2.0 dB (<-100 dBm)

Gain Res, RF Playback

0.1 dB

Harmonics

-30 dBc @ 0 dBm typical

L.O. Leakage⁵

300 MHz to < 5.5 GHz, <-45 dBc

5.5 GHz to 6.6 GHz, <-41 dBc

50 MHz real-time BW (1dB)

Sample Rate

62.5 MS/s

DynamicRange

80 dB SFDR

Streaming Rate

250 MB/sec/channel

Output Resolution

16-bit

Bandwidth

10 MHz max < 120MHz carrier freq

20 MHz max < 330MHz carrier freq

50 MHz max > 330MHz carrier freq

DynamicRange

80 dB minimum

Maximum Input Power

+5 dBm (LNA bypassed)

Minimum Input Power

Limited by noise floor

Noise Figure (with LNA)

2 dB maximum

Pre-Amp\LNA Gain Range

> 50 dB

In-Band Spurious

30 dBc maximum

DC Bias (for active antenna)

100 mA @ 5V maximum

Specifications are defined typical at 25˚ +/- 5˚C. Test condition pre-amp gain at 55 dB with 9 effective bits of quantization. Specification applies over entire frequency range. For more information on definition of specification and methodology, consult the application note on timing and synchronization for GNSS Record & Playback.

Timing offset between channels

2 ns maximum; 1 ns typical

Initial amplitude tracking

1 dB typical

Amplitude tracking variation6

0.5 typical

Cumulative phase error effect on positioning7

<2 mm/hour

10 MHz REF Input (50Ω)

1 per channel x SMA Female

Level 0/+10 dBm, Max: +15 dBm

10 MHz REF Output (50Ω)

4x SMA female

Level, Max: +7 dBm ± 2 dB

RF Input (50Ω)

N-female per channel

RF Output (50Ω)

sma-female per channel

Environmental

30 minutes

PXI Rackmount⁸

20,5 kg (45.1 pounds)

Zarges Case (PXI + RF Tray)

51 kg (110 pounds)

Zarges Case (HDD + PS)

55 kg (121 pounds)

Rackmount

177 mm x 465 mm x 467 mm

Zarges case

355 mm x 533 mm x 787 mm

Operating

+5 ˚C  to +45 ˚C

Storage

-20 ˚C  to +75 ˚C

Operating

10% to 90% non condensing

3.5” Hot-swappable Drive Bays

12 x 3.5” 2 TB SATA 2.0 Hard Disc Drives

Power Input (AC)

120 or 240V

IEC 60320-C14 Power connector inlet

IEC 60320-C13 to NEMA 5-15 P, 3 m (9.8 ft) North American Power cord included

IEC 60320-C13 to CEE 7/7, 3 m (9.8 ft) European Power cord included

Power Input (DC)

13.5 V typical (11.5 V minimum; 15 V maximum)

Power Consumption

1 channel <400 W

3 channels <500 W

1 year

3 years

1 x 10/100/1000 Mbps RJ-45 LAN Port

4 x USB 2.0/1.1 Type A Peripheral Ports (front)

1 x DBHD-15 F VGA port

UL pending

CE Class A pending

FCC 47 part 15 Class A pending

European Directive 98/336/EEC Class A (Emissions) pending

European Directive 2002/95/EC (WEEE) pending